Tension Meter DXP

• The analog display of tension meter DXP shows changing and fluctuating tensions fast and enables an optimal process adjustment

• Non-rotating ceramic pins permit line speeds up to max. 6000 m/min

• The ceramic pins have on each side small flanges to guide the thread and to avoid slipping off the ceramic pins

• Small measuring head width with of only 27 mm for measurements at positions with limited space

• Length of measuring head approx. 64 mm

• Roller shifting mechanism ensure easy acquisition of the running material

• Built-in mounting holes permit fixed installation for continuous tension measurement

• Turned-up outer finger edges guide the running filament into the roller grooves

• Special finger support located on the rear side reduces the effort to move the outer roller assembly

Standard Features

• Everything in operator’s view:
– the guide rollers
– the measured material
– the readings

• Large, V-grooved guide rollers with 32 mm groove diameter, ball-bearing mounted

• Each instrument is individually calibrated for highest accuracy

• 41 mm Ø scale

• Tension meter with rugged aluminium housing

• Certificate of Compliance with the order 2.1 according EN 10204 is included

• Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Finger Support : We recommend mounting a finger support for higher tension ranges

Note : Tension meter DXP does not include a material thickness compensator

Available Models