Tension Meter DTXL

Special Features

• Memory for 60.000 readings

• USB interface

• Tension meter DTXL with 5 different memory modes:
Mode S: statistics only
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement (e.g. short time spooling)
Mode C: continuous logging over a user set time and different series of measurement (2 Hz)
Mode F: fast, continuous logging over a user set time and different series of measurement (1000 Hz)
Mode D: storage of single readings and statistic

• 10 Material memory locations for customer made calibrations

• Software Tension Inspect 3 for displaying real-time readings on a PC and to store them into a file

• Wi-Fi module for wireless communication with a PC (optional)

Function of basic instrument DTSL

• Ball-bearing mounted guide rollers 29.5 mm groove Ø
– V-grooved (for material with max. 4 mm Ø)
– U-grooved (for material with 3 up to 10 mm Ø)
– tape grooved (for material with max. width of 10 mm)

• Large roller diameter for minimized material deflection

• Special guides on the bracket assembly permit easy material acquisition

• Tension meter DTXL with large, backlight LCD-display

• 3 different display modes:
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)

• The display rotates in 90° steps for better reading

• New, unique, force reduced material catching system

• Automatic „Zero-Setting“ in each measuring position using a special sensor technique

• 4 Material memory locations for customer made calibrations

• Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material

• Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits

• High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation

• Selectable units of measurement: cN, daN, g, kg, N, lb

• Menu set-up in English or German language

• Flexible menu set-up to meet operators demand

• Some functions can be password protected

Standard Features

• Everything in operator’s view:
– the guide rollers
– the measured material
– the readings

• Filament guide and roller shifting mechanism ensure easy acquisition of the running material

• Rubberized handle provides a secure hold in the operators‘ hand

• Tension meter DTXL with rugged aluminium housing

• LiPo accumulator (approx. 40 hours continuous operation) with AC adapter

• CE certified, interference resistant against static electrifications

• Certificate of Compliance with the order 2.1 according EN 10204 is included

• Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models